Jiangsu Fengyun Machinery Technology Co., Ltd
Service Hotline:051265085292

C steel production process

C steel production process

It is hydraulic power, and power is very large, generally about 22KW, similar to the shear plate bending machine, the general control process is complex, more use of PLC control.
C-shaped steel machine is a set of rolls can produce a variety of specifications C-purlins finished single-roll forming unit. The machine is mainly composed of passive loading frame, leveling device, punching device, cutting device after molding, hydraulic station, computer control system. The machine uses automatic flying saw punching, easy to operate and so on. C-beam machine main purpose products can be used as large and medium-sized industrial civil construction of the main force structure.
The mold used in the C-section machine requires an upper die and six lower molds of the same size. The upper mold and the lower die are mounted. The lower mold is mounted directly on the hexagonal wheel table. The upper mold is mounted on the bottom surface of the carriage , And place the appropriate thickness of the pad, to ensure that the upper and lower mold mold, the four sides of the gap evenly, the distance between the upper and lower mold is equal to the thickness of the required tile. And then the above model prevail, the table transposition, the installation of the remaining five to pay the next model, all installed up and down after the mold can drive to tile.


Address:Suzhou City, Wang Tingzhen Huayang Village, No. 56, Huatong Road  TelePhone:051265085292  MobilePhone:18912785298  E-mail:jsfyjxkj@sohu.com

Mobile