Jiangsu Fengyun Machinery Technology Co., Ltd
Service Hotline:051265085292
Home > news > Content

The daily maintenance of the floor board equipment

Floor of the board equipment as a basic metal forming machinery, and its maintenance measures if the bit can be done to improve the efficiency of the floor machine itself is the life of the board itself, we have to introduce the following is its maintenance content: First, the hydraulic Tubing 1 , floor board machine used by the hydraulic oil for the ISO KL256 , weekly inspection tank oil level, such as hydraulic system maintenance should also be checked, the oil level should be filled with hydraulic oil oil; 3 , the system oil temperature should be 35 ~ 60 ℃, shall not exceed 70 ℃, such as too high will lead to deterioration of oil and accessories deterioration. 4 , the new machine work after 2000 hours of oil change, after each work 4000 ~ 6000 hours after the oil change, each oil change, should clean the fuel tank; Second, the filter 1 , the new building board machine use a month later, check The tubing bending at any deformation, if abnormal should be replaced, after two months, should be tightened all parts of the connection, the work should be shut down, the system without pressure. 2 , the monthly cleaning of hydraulic components (substrate, valves, motors, pumps, tubing, etc.), to prevent stolen goods into the system, can not use cleaners

The main features of floor deck equipment

1: to adapt to the requirements of the rapid construction of the main steel structure, in a short period of time to provide a firm platform for operation, and can use a number of floor laying pressure plate, layered pouring concrete slab water construction.

2: in the use of the floor board as a concrete floor of the tensioned steel bars, but also improve the stiffness of the floor, saving the amount of steel and concrete.

3: pressure plate surface embossing so that the floor between the floor and the concrete to produce the greatest binding force, so that the two formed as a whole, with stiffeners, floor deck system with high strength bearing capacity.

4: Under cantilever conditions, the floor board only serves as a permanent template. The length of the cantilever can be set according to the cross-section characteristics of the floor deck. In order to prevent the cracking of the cantilever plate, the design of the structural engineer is accompanied by a negative reinforcement at the support.

5: The company floor board has passed the national fixed fire extinguishing system and fire-resistant components of the quality inspection center of the fire resistance testing, as a composite floor board without fire spraying, thus greatly reducing the cost of the project.

Address:Suzhou City, Wang Tingzhen Huayang Village, No. 56, Huatong Road  TelePhone:051265085292  MobilePhone:18912785298  E-mail:jsfyjxkj@sohu.com